Networking devices like range extenders are only as good as the signals they transmit. If ever they encounter issues that are beyond connectivity, troubleshooting can eat up quite some time. And even when you have followed every possible troubleshooting step, ensuring complete resolution to issues isn’t guaranteed. This is where learning how to factory reset Tplink Extender can help.
Resetting your extender will mean erasing all the settings and related customizations you currently have on the device. The network settings like the extender SSID and password, the saved network details of the main router, any DNS servers you have customized, child controls you have enforced and more, all will be deleted. This means that your device will be reset to factory default settings and you will have a device as good as new.
Now, if you have come across issues in your TP-Link extender and have followed every possible troubleshooting step, and yet have failed to resolve them, this blog will provide complete information on how to reset tp link extender in easy steps.
TP-Link range extender reset- Things to Know
As discussed, when you reset a device, including your TP-link extender, the settings which you might have configured get erased and the factory settings are restored. Settings including the Network SSID, network password, admin username & password, any parental controls, MAC filters, port forwarding, custom DNS settings, etc. will be reset. This implies that the device will need to be reconfigured again. Therefore, it is also important that you only follow the reset process if you know how to configure the settings back again. If not, you can resort to power cycling for now. So, is reset an all-in-one TP-Link wifi extender troubleshooting method? Yes, provided you know how to reconfigure the device settings correctly.
Note: Power cycling is a process where you shut down the router and restart it after a few seconds. It can help resolve normal glitches and recover from issues related to memory and overheating.
If you still feel compelled to reset your tp-link extender, you should probably connect with an expert or seek assistance over phone from the official support team.
Different tp-link extender RESET methods
There are usually two ways you can complete the Tplink range extender reset process. The web-based setup wizard and the physical reset button can both help. Depending on what’s convenient to you, you can follow the steps discussed below:
Soft RESET
While most users would only be familiar with the hard reset process, you can actually reset your extender without clearing out the customized settings. This process includes resetting the connection between your tp-link extender and the main router. As compared to the hard TP-Link reset wifi extender process, soft reset methods take effect instantaneously as no reboot is involved. If you are looking to follow the soft reset process, here are the steps to follow:
- Unplug the ethernet cable that connects the extender to the main router and reconnect it after a few seconds. In some tp-link extender models, you might need to press the Connect/Disconnect button to do that.
- Another way to do a soft reset on some tp-link extenders is by using the web-based setup wizard. You can log in to the tp-link extender setup wizard and from the menu, select the ‘Restore Factory Defaults’ option.
The reset process will begin and the extender will reboot once complete. You can now configure the network settings using the tp-link extender setup process. If you were planning to reset tp-link to new wifi, this is the stage where you can do that.
Hard RESET
Unlike the soft reset, when you use the hard reset method, the setting customizations will get cleared and will need to be reconfigured again. This is a time-intensive process as device restart and reconfiguration are involved. You can follow this process if you are unable to fix issues using the tp-link extender troubleshooting steps, or have forgotten the admin password to access the extender settings wizard. Here are some steps you can follow to hard reset your tp-link extender device:
- Locate the Reset button on the rear panel or at the bottom of the tp-link extender as per the model you are using.
- With the extender powered on, press and hold the reset button for about 10 seconds. Some tp-link extenders might require holding down the button for longer. You can use a thin object like a pin or a paperclip to press the button.
- When you notice the power LED and other LEDs begin to flash altogether, release the RESET button and allow the router to initiate the reset process.
- Wait for the RESET process to complete and the extender to reboot.
The Tplink range extender reset process is now complete and you can reconfigure the network settings using the general tp-link extender setup process.
FAQs
How do I reset TP-Link Extender Password?
You can reset tp-link extender password using the TP-Link Tether App as well as the web-based settings management wizard. To change TP-Link extender password using the app, you should have the app installed on your device. Once installed, log in to the interface and access the System Tools option from the menu. In the window that now appears, simply click on the router password and type in the existing credentials in the respective field, and the new password you wish to keep in their respective fields. Once changed, you can click on the Save button. This will ensure that the changes are saved. To ensure that the settings take effect, reboot the extender once.
For the web based setup method, you can login to the web-based setup interface using the default web address i.e. tplinkrepeater.net or tplinkextender.net. Once you have logged in, you can simply head to the router administration section and edit the router password details you wish to keep. Again, click on the Save button and the settings change will take effect.
This process comes in super-handy if you have TP-Link Extender forgot password issue.
What to do if the tp link extender reset not working?
If the extender reset process is not working, you can first try to power cycle your device. To power cycle the device, you can follow the 30-30-30 rule. This means that you should unplug all the devices from the mains power and allow them to remain in this state for about 30 seconds. Then after 30 seconds, reboot it.
The Final Word
Resetting your range extender device is easy when you know the right steps to do the same. Learning how to reset tp link extender is also essential since it can help in times of need, a lot. However, always ensure that you try the device restart option first before you reset the device. If you are still unable to complete the tplink range extender reset process, you can always reach out to our experts for help.